Data Recovery Solution Case Study

1) SEAGATE PIPELINE HD 2 SERIES 500 GB, NO DETECTION, FIRMWARE ISSUE- NO HOST FIS-READYSTATUSFLAGS 2002A1A5, DATA RECOVERY CASE STUDY

Hello everyone, welcome to data Empires. Friends in this session of Seagate firmware repairing case study training we will discuss a different Seagate firmware problem and its solution. There is a problem in Pipeline HD 2 series, 500 GB F3 architecture hard disk that, when connecting this hard disk to the system, it is visible that the hard disk is getting proper power, and there is no knocking sound coming from it, but when we check and scan device in device manager, hard disk is not detected after hardware scanning.

When we connect this drive to our Seagate firmware tool, we get an error message of “NO HOST FIS-READYSTATUSFLAGS 2002A1A5 “. This training video will learn how to solve this firmware issue with the help of a basic Seagate firmware repairing tool, and the data recovery procedure.

Video Duration: 7 Minute

Video Teaser :

In English

In Hindi

2) SEAGATE BARRACUDA 7200.9 80 GB , NO DETECTION , FIRMWARE ISSUE – NOT INTERFACEAGE, DATA RECOVERY SOLUTION CASE STUDY

Hello everyone, welcomes to data Empires. Friends in this session of Seagate firmware repairing case study training we will discuss a different Seagate firmware problem and its solution. There is a problem in Barracuda 7200.9, 80 GB T architecture hard drive that when we power up the hard disk, this hard disk is getting proper power, and there is no mechanical clicking sound coming from it. But the hard drive is in no detection condition.

When we connect this drive to our Seagate firmware tool, we get an error message of “NOT INTERFACEAGE “. In this training video will learn how to solve this firmware issue with the help of a basic Seagate firmware repairing tool, and the data recovery procedure.

Video Duration: 7 Minute

Video Teaser :

In English

In Hindi

3) SEAGATE MOMENTOUS THIN 500 GB, PARTIAL DETECTION, FIRMWARE ISSUE-SIM ERROR 3005, DATA RECOVERY SOLUTION CASE STUDY

Hello everyone, welcome to data Empires. Friends in this session of Seagate firmware repairing case study training, we will discuss a different Seagate firmware problem and its solution. There is a problem in the momentous thin series 500 GB hard disk that, it gets detected sometimes, and sometimes it does not get detected. When the hard disk is in detection condition, it gets detected only in the device manager but not in disk management.  When we power up the hard disk, and when the power is started in this hard disk, a light clicking sound comes, and then the clicking sound gets stopped. After that, the power status also remains OK.

When we connect this drive to our Seagate firmware tool, we get an error message of “SIM ERROR 3005 “. In this training video will learn how to solve this firmware issue with the help of a basic Seagate firmware repairing tool, and the data recovery procedure.

Video Duration: 5 Minute

Video Teaser :

In English

In Hindi

4) WD BLUE 250 GB MIDORI FAMILY, SYSTEM HANG ISSUE, DATA RECOVERY SOLUTION CASE STUDY

Hello everyone, welcome to data Empires. Friends in this session of WD firmware repairing case study training we will discuss a different WD firmware problem and its solution. There is a problem in WD BLUE 250 GB MIDORI family hard disk that, when we connect this hard disk to the system, it is visible that the hard disk is getting proper power, and there is no knocking sound coming from it. But when we check and scan the device in the device manager, Due to the firmware issue, the hard disk does not get loaded properly and causes the system to hang.

In this training video, we will learn how to solve this firmware issue with the help of the WDR repairing tool, and the data recovery procedure.

Video Duration: 9 Minute

Video Teaser :

In English

In Hindi

5) WD USB MY PASSPORT – CHARGER FAMILY | SLOW DETECTION – SYSTEM HANG, DRIVER LOADING ISSUE | NATIVE SOLUTION, WITHOUT USING ADVANCE FIRMWARE TOOLS

Hello Everyone, welcomes to data Empires. Friends, the latest version of the WD on my passport hard disk is, charger family version. There comes many firmware-related problems in the hard discs of this family. Generally, due to firmware problems, the hard disc is not detected in the system. And if it gets detected, then it performs very slowly due to which, the system gets hang.
Many times the drive gets detected in the device manager, but it doesn’t open in the disk management.

When we open this hard disk casing, then we find A 3.0 USB connector is connected to the PCB. In the hard disk of the charger family, the MCU has been locked by the manufacturers. And therefore to get the backup of ROM and firmware modules, we require an unlocked SATA PCB. If the Charger family hard disk is not getting detected, then for its detection, there is a need for advanced firmware work. But, if the hard disc is getting detected, and it is working slowly, or it is getting the system hanged, and hard drive drivers are not getting loaded properly, then in such cases, we can recover the data without SATA conversion and firmware repairing.

In this training session, we will discuss how to recover data from the latest WD my passport charger family hard disk, having the problem of slow detection and system hang without using advanced firmware repairing tools and SATA conversion.

Video Duration: 8 Minute

Video Teaser :

In English

In Hindi

6) SEAGATE HARD DISK | 3 TB DRIVE| LOW HEALTH ISSUE | HARD DISK REPAIRING PROCESS

Hello everyone, welcome to data empires. All computer dealers and vendors have many of the hard disks that are in detection condition but have low health issues, Windows does not load properly, S.M.A.R.T error occurs, and hard disk slows down. These issues in the hard disk are caused by bad sectors, week heads, and firmware.

In this video tutorial of data recovery and hard disk repairing training, we will discuss the repairing process of the low health Seagate company hard disk.

Video Duration: 11 Minute

Video Teaser :

In English

In Hindi

7) WD EASYSHARE | 4 TB USB HARD DISK | SPYGLASS FAMILY | SYSTEM HANG ISSUE | DATA RECOVERY SOLUTION

Hello everyone, welcome to data Empires. Many times we face the issues that when we connect a hard disk to the system, then the system gets hanged. Sometimes this issue occurs just because the initial section of the hard disc has too many bad sectors,

In this case study video of data recovery training, we will discuss the different methods of sector imaging, and the recovery process of the WD USB 4 TB USB hard drive.

Video Duration: 8.30 Minute

Video Teaser :

In English

In Hindi

Need Help? Chat with us