WD USB My Passport – Charger Family , Slow Detection- System Hang ,Native Solution
WD USB MY PASSPORT 2TB – CHARGER FAMILY | SLOW DETECTION – SYSTEM HANG, DRIVER LOADING ISSUE | NATIVE SOLUTION, WITHOUT USING ADVANCE FIRMWARE TOOLS
Hello everyone, welcome to data Empires. The latest version of the WD my passport hard disk is, charger family version. There comes many firmware related problems in the hard discs of this family. Generally, due to firmware problems, the hard disc is not detected in the system. And if it gets detected, then it performs very slowly due to which, the system gets hang. Many times the drive gets detected in the device manager, but it doesn’t open in the disk management.
In the hard disk of the WD charger family, the MCU has been locked by the manufacturers. And therefore to get the backup of ROM and firmware in this hard disk, we require an unlocked SATA PCB. The price of this unlocked PCB is very high. Its cost ranges from 300 to 500 dollars. Companies working in the field of advanced firmware repairing require these PCBs. If the Charger family hard disk is not getting detected, then for its detection, there is a need for advanced firmware work.
But, if the hard disc is getting detected, and it is working slowly, or it is getting the system hanged, and hard drive drivers are not getting loaded, then in such cases, we can recover the data without SATA conversion and firmware repairing.
In this training session, we will discuss the data recovery from the latest WD my passport charger family hard disks, having the problem of slow detection and system hang.